Skip to main content

Sector Solutions

Industries We Serve

Four industries, each with a dedicated range of tapes engineered around its thermal, dielectric, flame-retardant and adhesion requirements — not a general-purpose afterthought.

Operator wrapping red adhesive tape around a cylindrical part by hand in the workshop.

How we qualify

From application to roll specification

Every sector requests something different from the tape. Before a construction is offered, the material is passed against the four properties that matter on the line and in service — using the same figures published on each product data sheet.

1. Service temperature

The minimum and maximum temperatures the application sees during operation, curing or soldering.

2. Dielectric performance

Insulation and breakdown ratings for roles where the tape sits next to live or charged surfaces.

3. Adhesion & removal

How the tape is expected to hold during its job — and whether it must come off residue-free afterwards.

4. Abrasion & flame resistance

Mechanical protection and retardant behaviour for warm, vibrating or exposed environments.

Industries covered
4
Products across sectors
10
Product families
4
Sector temperature ladder
-40–120 °C

Sectors we supply

Four industries. Dedicated ranges.

Each sector below links to a full industry page built from its own product set. The counts shown come straight from the catalog.

Industry 01

Automotive Cable Harnessing

Flame-retardant and abrasion-resistant wrapping tapes for engine-bay harnesses, battery cables and wire bundling.

  • Flame-retardant and abrasion-resistant wrapping for engine-bay harnesses, battery cables and wire bundling.
  • Lengths are delivered in slit rolls and continuous spools so automated harness lines stay fed without restarts.
Products
0
Service range
Per product TDS
Dielectric rated
0

Industry 02

Construction & HVAC

Aluminum foil and vapor barrier tapes for duct sealing, insulation facing and moisture control in HVAC systems.

  • Aluminum foil and vapor barrier tapes for duct sealing, insulation facing and moisture control.
  • Constructions are selected for surface adhesion, vapor closure and long-term aging.
Products
1
Service range
-40 to 120 °C
Dielectric rated
0
Heavy-duty acrylic foam mounting tape photographed straight on.

Product families in this sector

Representative part numbers

Industry 03

Packaging & Logistics

High-tack carton sealing tapes for e-commerce, FMCG and export shipping with tamper-evident and printed options.

  • High-tack carton sealing tapes for e-commerce, FMCG and export shipping.
  • Tamper-evident and printed options are part of the standard product range.
Products
7
Service range
-40 to 120 °C
Dielectric rated
0

Industry 04

PCB & Electronics Assembly

Polyimide masking tapes that withstand wave soldering and conformal coating without residue or solder wicking.

  • Polyimide masking tapes that sit through wave soldering and conformal coating without residue or solder wicking.
  • Masking shapes and protective films are slit and rotary die-cut to board-level footprints.
Products
2
Service range
-40 to 120 °C
Dielectric rated
0
Polyimide film tape roll with amber film surface.

Product families in this sector

Representative part numbers

Product discovery

Browse by product family

Pick a family to jump into the full technical catalog filtered to that construction.

View all products

FAQ

Industry questions, answered

How we qualify a tape for your sector — from harness abrasion in an engine bay to residue-free masking after conformal coating.

Discuss your application
01 How do you qualify a tape for automotive cable harnessing?
We start from the harness environment: continuous and intermittent temperature, abrasion across hot underhood zones, flame class required by the vehicle programme, and whether the branch needs print identification. From there we shortlist the carrier and adhesive chemistry, then confirm it with a trial roll on your own harness spec.
02 Will your masking tapes survive PCB conformal coating?
Polyimide low-temperature masking films and silicone pressure-sensitive masking laminates are specified for immersion and selective-area coating, and are validated to lift cleanly after cure without residue or ionic contamination. Send us your coating chemistry and cure profile and we will confirm the exact grade.
03 Can you supply carton sealing tape for high-speed packing lines?
Yes. BOPP carton sealing tapes are built for machine-speed application with consistent peel across the roll, low unwind noise and an adhesive that will not transfer onto corrugate. We can die-cut lengths to your line feed rate to cut changeover time.
04 Do you make foil barrier tape for HVAC duct and vapour sealing?
Aluminium foil barrier laminates are supplied for duct joint sealing and vapour barrier applications. The tape bonds to the facing laminate, tears cleanly for rework, and needs no separate seam sealant, which typically removes a full site-visit step per joint.
05 Can you provide die-cut parts instead of rolls?
Rotary die-cutting runs in-house, so pads, gaskets, rings and mounting parts arrive on the exact footprint your assembly expects — clean edges, no adhesive web, and liner release that stays consistent across production runs. Send a drawing and annual volume for a quote.
06 What do you offer for coil and motor insulation?
Mica, polyimide, glass cloth and cloth carriers are supplied for slot, phase and ground insulation with dielectric strength verified against ASTM D-149. We can provide trial rolls for your design validation, then hold the construction on repeat production batches.

Don't see your application on this page?

Tell us what you are bonding, masking or insulating and we will route it to the right construction — or arrange samples before you commit. Each product's data sheet is published alongside it, and CoA documentation is issued on request.

Browse any product family above — the specification set is on the page.

Your RFQ

Continue to RFQ Form