PVC-2004
PVC Tape — Blue
PVC Film (Plasticised) / Rubber-Based
- Service
- -40 to 120 °C
- Peel
- 5.00 N/25mm
View Product
PVC Tape
PVC-2003
PVC Tape — Black
Plasticised polyvinyl chloride tapes for bundling, masking and general-purpose use.
PVC Film (Plasticised) / Rubber-Based
Black
Product gallery
Key performance
- Total thickness
- 0.0450 mm
- Service temperature
- -40 to 120 °C
- Peel adhesion
- 5.00 N/25mm
- Tensile strength
- 47.00 N/25mm
- Standard colour
- Black
- Slitting
- 0.50–1,600 mm
Technical Specifications
Property, test method and recorded value.
| Property | Test method | Value |
|---|---|---|
| Total Thickness | ASTM D-3652 | 0.0450 mm 1.77 mil |
| 180° Peel Adhesion to Steel | ASTM D-3330 | 5.00 N/25mm 12.9 oz/in |
| Tensile Strength | ASTM D-3759 | 47.00 N/25mm 5.3 lbf/in |
| Elongation at Break | ASTM D-3759 | 35% 35% |
| Operating Temperature | — | -40 °C to 120 °C -40 °F to 248 °F |
Values are typical results from controlled laboratory testing and are provided for reference only. They do not constitute a specification for acceptance. Perform your own evaluation against the exact application and request a certificate of analysis from the quality lab before production release.
Technical Overview
PVC-2003
Force per unit width
Both properties are measured on a 25 mm wide specimen and expressed in N/25mm.
180° Peel Adhesion to Steel
5.00
N/25mm
ASTM D-3330
Tensile Strength
47.00
N/25mm
ASTM D-3759
Elongation at break
Elongation at break
35
%
ASTM D-3759
Service temperature range
The documented continuous service span for this product.
- Minimum
- -40 °C
- Maximum
- 120 °C
The bar spans the documented range only. No performance is implied above 120 °C or below -40 °C.
Tape Construction
Layer diagram is schematic; layer heights are not to scale.
Section view
0.0450 mm total
PVC Film (Plasticised)
Rubber-Based
- Backing
- PVC Film (Plasticised)
- Adhesive
- Rubber-Based
- Core
- 76 mm Plastic · 38 mm Plastic · 25 mm Plastic · 76 mm Cardboard
- Slitting width
- 0.50–1,600 mm
Total thickness and slitting limits are recorded product data. Release liner, coating weights and any additional construction layers are not defined on this record and are therefore not shown; request a sample for the as-built construction.
Substrate Compatibility
Indicative guidance for the Rubber-Based adhesive family.
No compatibility guidance is published for the Rubber-Based adhesive family. Contact the technical lab for a substrate recommendation.
These ratings are indicative guidance for the adhesive family rather than a measured result for this specific product. Actual adhesion depends on surface energy, cleanliness, dwell time, temperature and application pressure. Perform an adhesion test per ASTM D-3330 before changing production line surfaces, and request surface preparation guidance from the technical lab.
Documentation
TDS is generated live from the product record; the SDS is the manufacturer-issued file when one is uploaded.
-
TDS
Technical Data Sheet
Construction, recorded specifications with test methods, conversion limits and certifications.
Download TDS -
SDS
Safety Data Sheet
Product identification and handling information. Sections not held in the product record are marked as unavailable rather than stated.
Download SDS
More from this range
Related PVC Tape
PVC-2006
PVC Tape — Brown
PVC Film (Plasticised) / Rubber-Based
- Service
- -40 to 120 °C
- Peel
- 5.00 N/25mm
View Product
PVC-2005
PVC Tape — Green
PVC Film (Plasticised) / Rubber-Based
- Service
- -40 to 120 °C
- Peel
- 5.00 N/25mm
View Product
PVC-2001
PVC Tape — Red
PVC Film (Plasticised) / Rubber-Based
- Service
- -40 to 120 °C
- Peel
- 5.00 N/25mm
View Product